Skip to content
Coverage and exclusions

Pre-existing conditions and maintenance clauses, explained

Two short clauses decide a lot of claims. Learn what they say, what they ask of you, and how to keep records that help.

By Editorial team3 min read
  • HVAC
  • Water heater
  • Plumbing
  • Roof

If you ask people who were unhappy with a home warranty claim what went wrong, two phrases come up again and again: "pre-existing condition" and "lack of maintenance." Neither phrase is a trick. Both are normal parts of a service contract. But they are worth understanding before you need them.

What a pre-existing condition clause says

A pre-existing condition is a problem that was already there before your coverage started. If your water heater was leaking the week before you signed up, the contract will usually not pay to fix that leak. That makes sense from the company's side. A service contract is meant to cover future breakdowns, not ones already in progress.

The tricky part is how a problem gets labeled as pre-existing. Some contracts say the problem must have been known or visible. Others say it only had to exist, whether you knew about it or not. That is a big difference, and it is worth finding the exact sentence in your contract.

  • Does the clause say "known" or "detectable" problems, or any problem that existed?
  • Is there a waiting period at the start of the contract? How long is it, as written?
  • Does a home inspection report affect what counts as pre-existing?
  • Who decides whether a problem was pre-existing, and can you ask for a second look?

What a maintenance clause asks of you

Most contracts expect you to take reasonable care of covered items. For a furnace, that usually means changing filters. For a water heater, it may mean flushing sediment. For plumbing, it may mean not ignoring a slow drip until it becomes a big one.

A maintenance clause lets the company decline a claim if a breakdown was caused by neglect. The wording varies a lot. Some contracts list specific tasks. Others just say "proper maintenance" and leave it open. If yours is vague, it is fair to ask the company what they would expect to see.

Records are your best friend

You do not need a binder full of receipts. You need a simple habit. When you change a filter, write the date down. When a technician services your system, keep the invoice. When you flush the water heater, snap a photo of the tank label and note the date.

That small record can make a real difference if a claim is ever questioned. It shows that the item was cared for, and it gives the technician useful history too.

Before you start a new plan

If you are starting a plan on a house you already live in, take a quiet hour and walk through your main systems. Does the heat come on? Does the water get hot? Are there drips under the sinks? Note anything that seems off and get it looked at before coverage begins, or at least know that it may not be covered.

If you have a recent inspection report, read the sections on heating, cooling, plumbing and the water heater. Anything flagged there is worth asking about before you sign.

Ask for answers in writing

If a clause is unclear, email the company and ask. Keep the reply. A written answer is easier to point to later than a phone call you half remember.

Good questions are short and specific. For example: "My furnace is about twelve years old and was serviced last fall. If it fails after the waiting period, what would you need to see from me to consider it maintained?"

Make the dates easy to find

A lot of maintenance questions come down to dates: when something was installed and when it was last checked. A home profile on this site keeps your install years in one place and shows a suggested check-in date for each system. If you choose to opt in to texts, we can remind you when one of your own systems reaches a check-in age.

This guide is general information, not advice about any specific plan or contract. Always read your own contract.